Due to the positioning of the centre in relation to the rim we recommend using as extra-deep 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer.
Click here for advice on how tight to apply spinners.
Kit Car/Replica HMC Mk IV Silverstone (Austin Healey Replica)
Home / Fitment Guide
Kit Car/Replica HMC Mk IV Silverstone (Austin Healey Replica)
Body
Sports
Engine
4l Rover V8
Year
1984 – 2001
Wheels
Original
XW5726
Rim Size
6″ x 15″
Centre
42mm Curly
Number of Spokes
70
Finish
Stainless steel (please contact us), chrome, silver-painted or black-painted (please contact us)
Lacing
Centre
Inset (mm)
10 Outset
Back Spacing (mm)
79.5 (+/- +) Click here to view an explanation of inset, outset and back spacing.
Tyre
205/60R15 or 205/70R15
Tube
Tubeless – This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 195/205 x 15 tubes to suit a 205/70R15 tyre or contact us if you are using a 205/60R15 tyre. We recommend using 15″ rim bands.
Notes
This wheel is the successor to our discontinued XW470.
Warranty
Stainless Steel and Chrome: two year structural and cosmetic
Painted: two year structural and one year cosmetic
Painted: two year structural and one year cosmetic
The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim.
Please note: ACWW warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1
Please contact us:
RSK265 – Left
RSK264 – Right
Five RN1215 per hub
Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼” per wheel
Studs will require shortening
Click here for a guide to fitting hubs, caps and centre-lock wire wheels
Spinners
Code
Type
Knock-on centre caps
Size
42mm
Thread
8 TPI
Ears
2
Logo
Plain (no logo)
Notes
Extra Information
Other comments
Always check the history of the vehicle to ensure that there have been no modifications to the running gear.
Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted.
We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available) and Cleaning Brush.
If you require any more information or advice please contact us:
Call 02 6586 1100 or 0412 780 900 – e-mail Paul & Gay