Tubeless
The chrome wheels have been tubeless since December 2007; and the silver-painted wheels have been tubeless since April 2008.
If you have the older, tubed wheels or are fitting tube-type tyres you will need 155/165 x 15 tubes – available with metal (race) or rubber (road) valve – and we recommend 15″ rim bands.
Options
XW5720
XW5726
Rim Size
5½" x 15"
6" x 15"
Centre
42mm Curly
42mm Curly
Number of Spokes
70
70
Lacing
Centre
Centre
Inset (mm)
10 Outset
10 Outset
Back Spacing (mm)
Tyre
185/70R15
195/65R15
Tube
Tubeless
The chrome wheels have been tubeless since June 2006; and the silver-painted wheels have been tubeless since October 2009.
If you have the older, tubed wheels or are fitting tube-type tyres you will need 175/185 x 15 tubes and we recommend 15/16″ rim bands.
Tubeless
This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres.
If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 185-195/65 x 15 tubes and we recommend 15/16″ rim bands.
Notes
Clearance is quite tight - a fitment check is recommended
Clearance is quite tight and the wheel might protrude from the bodywork. A fitment check is recommended.
Warranty
Stainless Steel and Chrome: two year structural and cosmetic
Painted: two year structural and one year cosmetic
The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim.
Please note: ACWW warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
RSTRL – Left
RSTRR – Right
Four RN716 per hub
Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼” per wheel
Studs will require shortening
Click here for a guide to fitting hubs, caps and centre-lock wire wheels
Type
Knock-on centre caps
Knock-on centre caps
Size
42 mm
42 mm
Thread
8 TPI
8 TPI
Ears
2
2
Logo
Triumph
Plain (no logo)
Note
We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer.
Click here for advice on tightening knock-on caps (spinners)
We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer.
Click here for advice on tightening knock-on caps (spinners)
Other comments
Always check the history of the vehicle to ensure that there have been no modifications to the running gear.
Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted.
We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available) and Cleaning Brush.
If you require any more information or advice please contact us:
Call 02 6586 1100 or 0412 780 900 – e-mail Paul & Gay
