Tubeless
This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres.
If you are using tube-type tyres or wish to fit a tube for any other reason please contact us. We recommend 15″/16” rim bands.
Plus 8
Home / Fitment Guide
Morgan Plus 8
Body
Sports
Engine
3528 cc
Year
1968 – 1993
Wheels
Original
XW5735 – preferred (see notes)
Rim Size
6.5″ x 15″
Centre
42mm Curly
Number of Spokes
72
Finish
Lacing
Inner & Outer
Inset (mm)
29
Back Spacing (mm)
125 (+/- 3) Click here to view an explanation of inset, outset and back spacing.
Tyre
205/60R15
Tube
Tubeless
This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres.
If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 195/205 x 15 tubes and we recommend 15″/16” rim bands.
Notes
Wire wheels were not a standard option when the vehicle was manufactured, originally only supplied with alloy wheels.
Vehicles built between 1968 and 1979 have a narrower body – wing modifications are necessary.
1991 onwards used the later stub axle and can use the existing bearings.
Other Wheel Options
Options
Options
XW5798
Rim Size
6" x 16"
Centre
42mm Curly
Number of Spokes
72
Finish
Chrome (please contact us)
Lacing
Inner & Outer
Inset (mm)
29
Tyre
215/65R16
Tube
Warranty
Chrome: two year structural and cosmetic
The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim.
Please note: ACWW warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1
Bolt-on hubs (please contact us for supply):
RSK211 – Left
RSK212 – Right
RSK211 – Left
RSK212 – Right
Five RN716L per hub
Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼” per wheel
Studs will require shortening
Click here for a guide to fitting hubs, caps and centre-lock wire wheels
Option 2
1991 onwards (please contact us for supply):
RSK479 – Front Left
RSK478 – Front Right
RSK477 – Rear Left
RSK476 – Rear Right
RSK479 – Front Left
RSK478 – Front Right
RSK477 – Rear Left
RSK476 – Rear Right
Integral fitting hubs so no nuts necessary
Click here for a guide to fitting hubs, caps and centre-lock wire wheels
Replacement parts for cars already on wire wheels, not for conversion from steel wheels
Spinners
Code
Code
KCM4280L (please contact us)
KCM4280R (please contact us)
Type
Knock-on centre caps
Knock-on centre caps
Knock-on centre caps
Knock-on centre caps
Size
42 mm
42 mm
42 mm
42 mm
Thread
8 TPI
8 TPI
8 TPI
8 TPI
Ears
2
0
2
0
Logo
Morgan
Morgan
Plain (no logo)
Plain (no logo)
Notes
We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer.
Click here for advice on how tight to apply spinners.
Continental style octagonal spinner
Requires a spinner spanner to tighten/loosen caps.
Click here for advice on how tight to apply spinners.
We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer.
Click here for advice on how tight to apply spinners.
Continental style octagonal spinner
Requires a spinner spanner to tighten/loosen caps.
Click here for advice on how tight to apply spinners.
Extra Information
Other comments
Always check the history of the vehicle to ensure that there have been no modifications to the running gear.
Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted.
We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available) and Cleaning Brush.
If you require any more information or advice please contact us:
Call 02 6586 1100 or 0412 780 900 – e-mail Paul & Gay